Specifications

CHAPTER 2
LaserWriter 16/600 PS Software
60 Interpreter Parameters
LocalLanguage string (English) Provides the natural language to use
when printing transmission reports and
activity logs on LaserWriter 16/600 PS
printers. The default value is
(English). Other values supported
include: (Dutch), (French), (German),
(Italian), and (Spanish).
Translation dictionaries for other
printers may also be uploaded to the
printer. If a dictionary for a specified
language is not available, the English
dictionary is used. This value can be up
to 50 characters in length.
MaxFaxBuffer integer RAM
dependent
Determines the upper limit of the
number of bytes of printer RAM that
can be used for incoming and outgoing
fax data. This value is used only when
the StorageDevice parameter has a
value of (%ram%).
Memory used is based on the total
amount of RAM in the printer, as
follows:
>16 MB = 8 MB fax buffer
>10 MB = 4 MB fax buffer
>8 MB = 2 MB fax buffer
The memory is not allocated and locked
for the data buffer. The value of this
parameter is only an upper limit.
PostScriptPassword string () Provides a method for setting a pass-
word, which is then required to use the
fax capabilities of the printer. This
applies to sending as well as receiving
faxes. The default value is no password.
Maximum length of the password is
32 characters.
ProtocolVersion string (2.108) Indicates the version of the T.30 fax
code in the printer.
ReceivePostScript boolean true Determines whether the fax printer
receives PostScript language files. A
value of true indicates that the printer
does receive PostScript files. A value of
false indicates that PostScript files are
not accepted and only CCITT
compressed raster format faxes are
accepted.
continued
Table 2-20 Parameters for the %Fax% device (continued)
Key Type Default Description