Specifications

CHAPTER 2
LaserWriter 16/600 PS Software
54 Interpreter Parameters
Enabled boolean true Indicates whether data arriving at
the printer should be scheduled for
execution. If the value of this
parameter is true, data is executed.
If the value is false, data is not
executed. Always set the value of
this parameter to true for this
communications channel.
EthernetAddress string Hardware
dependent
A unique 17-character string that
represents the Ethernet address of
the printer.
EthernetType name /AUI
Filtering name /None Indicates whether the input data
stream needs further filtering before
it can be correctly interpreted as a
page description language.
FrameType name 802.3 Indicates the frame type being used
on the Ethernet port.
HasNames boolean false Indicates whether the printer
supports named files. If the printer
is not mounted, or if Type is
/Communications, the value of
this parameter is false. This value
is a read-only constant.
IPAddress string (0.0.0.0) Controls the IP address used for IP
connections. The default value of
(0.0.0.0) indicates the reverse
address resolution protocol. If the
value is set to any other number,
that number is used as the IP
address of the printer.
Interpreter name /PostScript Indicates the type of executable job
represented by the arriving data.
Alternatives available on the
LaserWriter 16/600 PS are:
■ PostScript
■ LaserJetIII
■ AutoSelect
NetworkName string (LaserWriter
16/600 PS)
Indicates the name actually chosen
by the printer on the network. Due
to name conflicts, this name may not
be the same as the value for the
system parameter PrinterName.
continued
Table 2-16 Parameters for %NetworkInterface% and
%NetworkInterface_Pending% (continued)
Key Type Default Description