Specifications

CHAPTER 2
LaserWriter 16/600 PS Software
Interpreter Parameters 53
Network Interface Parameters 2
The 14-pin AUI connector supports Ethernet network communication. Table 2-16 lists the
factory default settings for %NetworkInterface% and
%NetworkInterface_Pending%.
HasNames boolean false Indicates whether the printer
supports named files. If the printer is
not mounted, or if Type is
/Communications, the value of
this parameter is false. This value
is a read-only constant.
Interpreter name /PostScript Indicates the type of executable job
represented by the arriving data.
Alternatives available on the
LaserWriter 16/600 PS are:
■ PostScript
■ LaserJetIII
■ AutoSelect
On boolean true Indicates whether or not the printer
driver for the communications
device is turned on and able to
receive and send data. If the value
of this parameter is false, data
sent to the printer is lost.
Type name /Communications Indicates the general category
of device represented by the
parameter set.
Table 2-16 Parameters for %NetworkInterface% and
%NetworkInterface_Pending%
Key Type Default Description
DelayedOutputClose boolean false
Determines how the output channel
is managed after a job completes
execution.
When the value of this parameter is
set to true, an end of file indicator
is not sent until all of the pages of a
job have been printed. The network
channel remains open. Messages
such as printer error messages are
sent to the channel if it is either the
output channel for the job
executing, or the output channel for
jobs that have finished executing
but have not finished printing.
continued
Table 2-15 Parameters for %EtherTalk% and %EtherTalk_Pending% (continued)
Key Type Default Description