Specifications

CHAPTER 2
LaserWriter 16/600 PS Software
Interpreter Parameters 51
Interpreter name /PostScript Indicates the type of executable job
represented by the arriving data.
Alternatives available on the
LaserWriter 16/600 PS are:
■ PostScript
■ LaserJetIII
■ AutoSelect
On boolean true Indicates whether or not the printer
driver for the communications device
is turned on and able to receive
and send data. If the value of this
parameter is false, data sent to the
printer is lost.
OutputDevice string (%Parallel%) Specifies which communications
device to use for stdout and
stderr. When this parameter is set
to %Parallel% the output is
directed back out the parallel port.
Protocol name /Raw Indicates the type of communications
protocol to use:
■ Binary
■ Normal
■ Raw
■ TBCP (tagged binary
communication protocol)
For further information on protocols,
refer to Section 3.5.3 of the PostScript
Language Reference Manual Supplement.
Type name /Communications Indicates the general category of
device represented by the parameter
set.
NOTE All values, with the exception of Type, persist across cycles and restarts.
Table 2-14 Parameters for %Parallel% and %Parallel_Pending% (continued)
Key Type Default Description