Specifications

CHAPTER 2
LaserWriter 16/600 PS Software
Interpreter Parameters 43
PageCount integer 0 Indicates how many pages have
been successfully printed since
manufacture. This is a read-only
parameter.
PrinterMode integer 0 Indicates the position of the printer’s
configuration switch. The value is 0
when the switch points down and 1
when it points up.
PrinterName string (LaserWriter
16/600 PS)
Establishes string as the current name
of the printer. You may set this
parameter to any string of 32 or fewer
characters. The colon (:) and the at
symbol (@) are not allowed.
RamSize integer Function of
RAM size
Indicates in bytes the amount of the
RAM installed in the printer. This is a
read-only parameter. The LaserWriter
16/600 PS printer is initially
configured with 8 MB of RAM. A
total of 32 MB can be installed.
RealFormat string IEEE Native representation of real
numbers in binary encoded tokens.
Revision integer 1 Designates the current revision level
of the ROM in which the interpreter
is running. This is a read-only
parameter.
StartJobPassword string () This write-only password authorizes
the use of the startjob operator.
Any string of 32 or fewer characters
may be used.
StartupMode integer 1 Controls whether the system start file
or some other startup procedure
should be executed during system
initialization.
If the value of this parameter is 0,
there are no special startup
procedures. Other values may be
used that are product specific, and
they result in product-dependent
startup procedures.
SystemParamsPassword string () This write-only password authorizes
the use of the setsystemparams
and setdevparams operators. Any
string of 32 or fewer characters may
be used. Value is persistent across
power cycles.
continued
Table 2-10 System parameters in the LaserWriter 16/600 PS printer (continued)
Key Type Default Description