Specifications

CHAPTER 2
LaserWriter 16/600 PS Software
40 Interpreter Parameters
CurScreenStorage integer 0 Identifies the amount of RAM
currently occupied by screen storage.
Indicates the name of the communica-
tions device that corresponds to the
current input file for the PostScript
language program currently being
executed. This is a read-only
parameter.
CurSourceList integer 0 Indicates the number of bytes
currently occupied by source lists.
This is a read-only parameter and
may be set to 0 or any number larger
than 0.
CurStoredScreenCache integer 0 Indicates the number of bytes
currently used for screen files on the
storage device. This number includes
currently active screens.
CurUPathCache integer 0 Indicates the number of bytes
currently occupied by the U path
cache. This is a read-only parameter
and may be set to 0 or any number
larger than 0.
DoStartPage boolean true Indicates whether or not the start
page should print during system
initialization. The start page prints if
the value is true. Value is persistent
across power cycles.
FactoryDefaults boolean false This parameter is generally false.
However, if you set the parameter to
true and immediately turn off the
printer, all nonvolatile parameters
will revert to the factory default
values the next time the printer is
turned on.
FatalErrorAddress integer 0 This integer is the hardware address
of the last call to the fatal error
handler. A non-zero value for this
parameter indicates that a fatal
system error occurred earlier.
FontResourceDir string (fonts/) Controls the location of external
fonts, which are resources in
PostScript Level 2.
GenericResourceDir string (Resource/) Controls the location of external
resources for the Generic category
and all other categories based upon it.
continued
Table 2-10 System parameters in the LaserWriter 16/600 PS printer (continued)
Key Type Default Description