Specifications

CHAPTER 2
LaserWriter 16/600 PS Software
Page Device Parameters 31
DialCallee
string
null
Indicates the phone number of the fax
machine to which the call is being directed.
The string is sent to the telephone
auto-dialer in the fax printer. It consists of a
sequence of the following characters:
P Begin dialing
T Begin DTMF (touch-tone) dialing
0-9 Send signal digit to telephone
exchange
*# Send DTMF symbol to telephone
exchange
, Pause for 2 seconds
W Wait for dial tone
The auto-dialer ignores any other
characters.
This string contains a maximum of 100
characters. The following string represents
a Swiss phone number preceded by the
routing prefix T and the suffix #:
T9,011-41-5-55-55-55732#
ErrorCorrect
boolean
true
Decides whether or not error correction
should be attempted for the transmission. If
the receiving machine does not have the
error correction facility, the transmission
takes place without it.
FaxType
integer or null
null
Decides how the actual page contents are
prepared and transmitted. If the value is an
integer, it should be 0 or 1:
0 Use standard CCITT group 3
resolution
1 Use fine CCITT group 3 resolution
If the FaxType is 0, the transmitted y
resolution of the fax is approximately
100 lines per inch. If FaxType is 1, the y
resolution is doubled, and transmission
time is correspondingly longer. If the
FaxType is null, the value of the %Fax%
device parameter, DefaultResolution
(1 or 0), selects the resolution.
continued
Table 2-7 Parameters for the FaxOptions dictionary (continued)
Key Type Default Description