Specifications

CHAPTER 2
LaserWriter 16/600 PS Software
24 Page Device Parameters
ManualFeedTimeout
integer
60
This parameter specifies the number of seconds
the printer will wait for a page to be fed manual-
ly before generating a timeout error. The default
is 60 seconds. If the value is set to 0, there is no
timeout, and the printer waits infinitely.
Value persists across power cycles.
Margins
array
[0 0]
This parameter is an array of two numbers that
relocate the page image on the media by x units
in the direction of the x coordinate, and y units
in the direction of the y coordinate. The x and y
values are expressed as 1/300 of an inch, or 1/
600 of an inch, depending on the resolution.
Value persists across power cycles.
MediaColor
string or
null
null
This parameter specifies the color of the input
media.
MediaType
string or
null
null
This parameter specifies the type of media,
paper, transparency, and so on.
MediaWeight
number
or null
null
This parameter specifies the weight of the media.
NumCopies
integer or
null
null
If the value of this parameter is not null, it
specifies the number of copies to produce. The
value applies to each individual page, or to the
entire document, depending on the setting of
Collate. If the value of NumCopies is null,
showpage and copypage should consult the
value of #copies in the current dictionary
stack each time they are executed.
OutputDevice
name
/Printer
This parameter specifies which communications
device is to be used for stdout and stderr.
OutputFaceUp
boolean
false
The value of this parameter determines whether
the printed pages are output face up or face
down in the output tray. If the value is false,
the pages are output face up. If the value is
true, the pages are output face down.
The value persists across power cycles.
continued
Table 2-2 Page device parameters (continued)
Key Type Default Description