User`s manual

___________________________________________________________
Setting up the LaserWriter II to prepare it for printing is simple and straightforward.
___________________________________________________________
Unpacking
1. Remove the packing material from the top of the LaserWriter II.
2. Lift the LaserWriter II.
Reach into the shipping carton. Get a good grip on the base of the printer, lift it out, and place it
on the work surface with the front (the Apple logo side) facing out.
___________________________________________________________
Warning-The LaserWriter II weighs about 45 pounds (20.5 kilograms). To prevent back
injury, bend your knees when lifting, and get help if you need it.
___________________________________________________________
Lifting the LaserWriter II
3. If the printer is still in its protective plastic bag, remove it.
4. Remove the packing material from the paper cassette slot.
The safest way to transport the LaserWriter II is in its original carton, so store the box and the
packing material for future use.
___________________________________________________________
Opening the LaserWriter II
1. Press the release button on the top of the printer. This releases the upper section of the
printer.
2. Lift the top up and to the left as far as it will go.
___________________________________________________________
Warning-Don’t touch the exposed electrical contacts or gears.
___________________________________________________________
The interior of the LaserWriter II
3. Peel off the filament tape and remove the packing material from inside the printer.
Removing the packing material from inside the printer
4. Remove the orange tabs. Toward the left side of the unit you’ll see two orange tabs extending
back from either side of a green felt cover. Remove the tabs and store them with the rest of the
packing material.
___________________________________________________________
Installing the toner cartridge
The toner cartridge contains the printer’s powdered "ink." Each cartridge lasts for
approximately four thousand pages, depending on the kind of printing you do. If you use the
LaserWriter II to produce a lot of graphic images, as opposed to text, you may find that you need
to change cartridges more often.
___________________________________________________________
Important-Follow the steps for this procedure in order. For more detailed information, refer to