User`s manual

Important-Even if you don’t want to change any of the preset options, don’t skip these steps if
you’re changing printers or are using the LaserWriter II for the first time. The default settings
may be incorrect, which will affect your output.
___________________________________________________________
6. Choose Print from the File menu.
7. Verify Automatic Feed. If necessary, click the Automatic Feed box to reset.
8. Click OK or press Return.
The LaserWriter II will now print one copy of every page of the document, automatically feeding
paper from the paper cassette. See "About the Print Dialog Box" later in this chapter for more
information.
9. Check your output.
___________________________________________________________
Face-up and face-down delivery
Most applications print first page first, so that face-down delivery collates properly. Some
print first page last, so that face-up delivery is appropriate. You’ll need to experiment to
determine which is true for a given application.
If you need face-up delivery, simply open the face-up tray. It can hold up to 20 sheets of 20-
pound paper.
___________________________________________________________
Warning-Never open the face-up tray when printing is in progress.
___________________________________________________________
Important-Always open the face-up tray before printing on paper stock heavier than 20
pounds, or on envelopes or transparencies.
With the face-up tray open, the LaserWriter II can accept stock of up to 36 pounds.
___________________________________________________________
Insert letterhead paper face up with the letterhead entering the printer first.
Insert three-hole paper with the holes toward the front (the Apple logo side) as the paper
enters the printer.
___________________________________________________________
You can obtain an envelope cassette from your authorized Apple dealer that allows you to print
envelopes (or envelope-shaped paper) using automatic feed.
___________________________________________________________
Important-For best results, be sure to position your address block properly.
___________________________________________________________
Positioning the address block
1. Take out the standard cassette.
2. Load up to 15 envelopes in the envelope cassette.
Stack the envelopes face up and with the top toward the rear as they enter the printer.
3. Adjust the envelope cassette to the size of the envelope. Adjust the sliding guides so that the
envelopes fit snugly but do not bow.