Specifications

Additional Procedures I/O Board Installation - 6
DIN connector on the I/O board.
4 Connect a LocalTalk connector box to the printer port at
the rear of the Macintosh.
5 Connect a LocalTalk cable between the printer and
Macintosh LocalTalk connector boxes.
6 Turn on the printer and wait for the test page.
7 Insert the “Printer Installation” disk in the internal
hard drive and switch on the Macintosh.
8 Select the LaserWriter printer through the Chooser
under the Apple menu.
9 Select Print Catalog from the File menu.
Note: If the printer produces a catalog, installation is
complete. If not, refer to “Print Engine Check” in
Flowcharts.