Specifications

Additional Procedures I/O Board Installation - 5
Installation Verification (NT, NTX, IIf, and IIg)
Note: The following materials are required to verify
installation:
• Macintosh 512K or later
• LocalTalk connector box for the Macintosh
• LocalTalk connector box with a Mini DIN-8 connector
(for the printer)
• A LocalTalk cable
• “Printer Installation” diskette.
1 Switch on the printer and wait about 3 minutes.
Note: If the printer delivers a startup test page, proceed
to the next page. If not, refer to “Print Engine Check” in
Flowcharts.
2 Switch off the printer.
3 Connect a LocalTalk connector box to the 8-pin Mini-