Specifications

Additional Procedures I/O Board Installation - 3

I/O Board Conﬁguration

Note:

The I/O board should not have to be configured.

Switches are pre-set at the factory and generally should not

have to be changed.

The NT and NTX boards come from the factory configured to

communicate via Apple Talk. If you want to communicate via

the serial port, refer to the Owner’s Guide for the proper

DIP switch settings. The SC board ships from Apple with the

SCSI priority set to 4.

The IIf and IIg boards have a port arbitration feature that

supports concurrent communication via all ports.