Operation Manual

Chapter 13 Tips and Troubleshooting 59
If you accidentally set iPod nano to use a language you don’t understand
m You can reset the language:
1 On the Home screen, tap Settings (the icon looks like a gear).
2 Tap the second menu item from the top (General).
3 Flick to the bottom of the list, then tap the second menu item from the bottom (Language).
4 Tap your language, then tap the button on the right at the top of the menu (Done).
The button on the left is Cancel.
m You can also reset all settings (your synced content isn’t deleted or modied). Tap Settings, tap
the last item in the menu (Reset Settings), then tap the red button (Reset).
The last button is Cancel.
m If you can’t recognize the Reset Settings menu item, you can restore iPod nano to its original
state and choose a language. See Update and restore iPod software on page 59.
If iPod nano is unresponsive and you see a box around items on the screen
1 VoiceOver may be turned on. Click the Home button three times to turn it o.
2 If the box is still visible, use VoiceOver gestures to turn it o (see VoiceOver gestures on page 50).
If iPod nano speaks the text on the screen
m VoiceOver may be turned on, and you must use VoiceOver gestures to turn it o (see VoiceOver
gestures on page 50).
If you want to check the system requirements
To use iPod nano, you must have:
m One of the following computer congurations:
•
A Mac with a high-power USB 2.0 port or USB 3.0 port
•
A Windows PC with a high-power USB 2.0 port or a USB 2.0 card installed
m One of the following operating systems:
•
OS X v10.7.5 or later
•
Windows 8 or later
•
Windows 7
•
Windows Vista, 32-bit edition with Service Pack 3 or later
m iTunes 12.2 or later (download it from www.itunes.com/downloads)
If your Windows PC doesn’t have a high-power USB 2.0 port, you can purchase and install
a USB 2.0 card. For more information about cables and compatible USB cards, go to
www.apple.com/ipod.
If you want to use iPod nano with both a Mac and a Windows PC
m If you’re using iPod nano with a Mac and you want to use it with a Windows PC, you must restore
the iPod software for use with the PC (see Update and restore iPod software on page 59).
Important: Restoring the iPod software erases all data from iPod nano, including songs.
You cannot switch from using iPod nano with a Mac to using it with a Windows PC without
erasing all data on iPod nano.