User Guide

Chapter 3 Phone 43
iPhone and the headset pair automatically when they’re connected to the travel cable.
The rst time you connect the headset, let it charge for about an hour until the status
light on the headset turns green. When iPhone and the headset are connected to your
computer, iPhone displays the headset battery level.
You must connect the headset with iPhone before you can answer or make calls.
Connect the headset with iPhone: Press the button on the headset.
Make or answer a call:
1 Place the headset in either ear with the microphone pointed towards your mouth.
Microphone
2 Make a call on iPhone, or press the button on the headset to answer an incoming call.
Button
Status light
End a call Press the headset button.
Adjust the volume Use the iPhone volume buttons.
Decline an incoming call Press button for about one second, until you hear
a beep.
Switch to an incoming or on-hold call and put
the current call on hold
Press button.
Switch to incoming or on-hold call and end
current call
Press button for about one second, until you hear
a beep.
Check whether the headset is turned on Press button. If the headset is on, status light
blinks green and headset beeps.
Turn the headset on Press and hold button for about three seconds,
until you see the status light blink green or hear
four rising tones.
Turn the headset o Press and hold button for about four seconds,
until you see the status light blink amber or hear
four falling tones.
For more information, see the iPhone Bluetooth Headset User Guide.