Repair Guide

iPhone SE (3rd generation)
073-00333-A | 79© 2022 Apple Inc. All rights reserved.
11. Follow Taptic Engine reassembly steps 10 through 12 to reinstall the Taptic Engine connector cowling.
• Display
Reinstall the following part to complete reassembly:
10. Press the lower end of the
Wi-Fi antenna to the top
of the lower antenna flex
cable (1). Press the upper
end of the Wi-Fi antenna to
the upper connector (2).
Speaker | Reassembly
Micro stix® is a registered trademark of OSG CORPORATION. Torx® is a registered trademark of Acument Intellectual Properties, LLC.