Repair Guide

iPhone SE (3rd generation)
073-00333-A | 76© 2022 Apple Inc. All rights reserved.
• When you reinstall
the speaker, ensure
that the tab on the
speaker goes under
the logic board and
above the screw hole.
• Reinstall the speaker
gently to avoid
breaking the tab or
bending the logic
board.
Caution
4. Insert the black stick under
the lower right corner of
the logic board. Tilt the
top of the speaker down
and slide it slightly under
the logic board (1). Lay the
bottom of the speaker in the
enclosure. Then slide the
bottom of the speaker into
the speaker port (2).
Speaker | Reassembly