Repair Guide

iPhone SE (3rd generation)
073-00333-A | 61© 2022 Apple Inc. All rights reserved.
1. Place the enclosure in
the repair tray with the
Lightning connector facing
the cutout. Use ESD-safe
tweezers to gently peel the
two adhesive tabs from the
bottom of the battery.
2. Hold down the iPhone with
one hand. With the other
hand, grasp one adhesive
tab and slowly pull it toward
the bottom of the iPhone.
As the adhesive strip
stretches, grasp it closer
to the battery and continue
pulling until you’ve removed
the entire strip.
Removal
Battery | Removal
Don’t pull the adhesive
strip against parts or
screws.
Caution
If the battery adhesive tab or strip breaks off and you can still see it, attempt to retrieve it with your
fingers and repeat step 2. If you can’t see the tab or strip, continue to step 3.
Important