Repair Guide

iPhone SE (3rd generation)
073-00333-A | 59© 2022 Apple Inc. All rights reserved.
10. Position the Taptic Engine connector cowling in the enclosure.
11. Use the green torque driver
and JCIS bit to install two
new crosshead screws
into the Taptic Engine
connector cowling.
12. Use the black torque driver
and Micro stix bit to install
one new trilobe screw
into the Taptic Engine
connector cowling.
Reinstall the following part to complete reassembly:
• Display
Taptic Engine | Reassembly