Repair Guide

iPhone SE (3rd generation)
073-00333-A | 53© 2022 Apple Inc. All rights reserved.
10. Use the black stick to
gently lift the end of the
Taptic Engine flex cable
off the Taptic Engine/dock
connector.
Only the lower end of
the Taptic Engine/dock
connector is attached to
the enclosure. To avoid
damaging or detaching
the connector, don’t move
it excessively.
Caution
11. Tilt up the right side of the
Taptic Engine (1) and slide it
to the right to remove it from
the enclosure (2).
Taptic Engine | Removal