Repair Guide

iPhone SE (3rd generation)
073-00333-A | 48© 2022 Apple Inc. All rights reserved.
1. Use a torque driver and
the Micro stix bit to
remove the trilobe screw
from the Taptic Engine
connector cowling. Set
aside the screw.
2. Use a torque driver and
the JCIS bit to remove the
two crosshead screws
from the Taptic Engine
connector cowling. Set
aside the screws.
3. Remove the Taptic Engine connector cowling and save it for reassembly.
Removal
Taptic Engine | Removal