Repair Guide

iPhone SE (3rd generation)
073-00333-A | 40© 2022 Apple Inc. All rights reserved.
21. Wait until the timer on the
display press beeps. Then
hold down the lever (1), pull
out the release knob (2) ,
and lift up the lever (3).
22. Remove the iPhone from the display press and the repair tray.
23. Use the blue torque driver
and Torx security bit to
install two new security
screws, one on each side of
the Lightning connector.
Display | Reassembly
• System Configuration is required if you’ve installed a replacement display or battery. Disregard
notifications about iPhone features on the Lock Screen until you complete System Configuration.
• After you’ve completed all removal and reassembly steps, learn how to initiate the System
Configuration process at support.apple.com/self-service-repair.
Important