Repair Guide

iPhone SE (3rd generation)
073-00333-A | 35© 2022 Apple Inc. All rights reserved.
Display | Reassembly
9. Position the camera connector cowling over the ends of the flex cables.
10. Use the black torque
driver and JCIS bit to
install three new crosshead
screws into the camera
connector cowling.
11. Gently press the ends of
the Home button flex
cable (1) and display flex
cable (2) to the connectors.
Press evenly along the
length of each connector.
Note: The display flex cable
covers the Home button
flex cable.