Repair Guide

iPhone SE (3rd generation)
073-00333-A | 32© 2022 Apple Inc. All rights reserved.
Display | Reassembly
Don’t remove the top
release liner yet.
Important
3. The replacement display
adhesive has a top release
liner, a middle release
liner, and a bottom release
liner. Grasp the tab on the
bottom release liner. Then
slowly pull the bottom
release liner (1) out from
under the adhesive (2)
while pressing the adhesive
onto the enclosure.
Bottom release liner
Adhesive
Note: The replacement
display adhesive for your
model may look different
from the illustration, but
the steps are the same.