Repair Guide

iPhone SE (3rd generation)
073-00333-A | 31© 2022 Apple Inc. All rights reserved.
Reassembly
Display | Reassembly
1. Inspect the internal display
clips. Ensure that they’re
at a 90-degree angle and
aren’t bent or damaged.
Ensure that you’ve
removed all adhesive
residue from the display
and the enclosure before
you apply the replacement
display adhesive.
Caution
2. Align the adhesive over the
enclosure with the top right
hole over the camera and
the bottom tab on the right.
• If the clips are bent
or damaged, you
may need to replace
the display.
• If you’re installing a
replacement display,
peel the protective
liner from the top and
underside of it.
Important
Inspect the enclosure for loose or extra screws and small parts, which can damage the battery and
cause safety issues.
Warning