Repair Guide

iPhone SE (3rd generation)
073-00333-A | 20© 2022 Apple Inc. All rights reserved.
Removal
Display | Removal
1. Use a torque driver and the
Torx security bit to remove
the two security screws,
one from each side of the
Lightning connector. Set
aside the screws.
4. Slide the top handle to move
the top suction cup as close
to the Home button as you
can without touching it.
Slide the bottom handle to
align the bottom suction cup
with the top suction cup.
Press the iPhone down to
secure the suction cups to
the enclosure.
2. Fully insert the levers of the universal display removal fixture into the universal display removal
adapter. Then tighten the thumb screws on the adapter.
3. Insert the iPhone into the fixture with the display faceup and the Lightning connector toward
the adapter.