Specifications
iPhone 4 Verication Testing — Functional Testing 187
2012-02-21
Test Video Playback
1. Launch the Videos app (iOS 5) or iPod app (iOS 4).
2. Select a test video and begin playback.
3. While the video is playing, verify that on-screen controls are functional.
Test Video Out
This test requires a TV with composite and/or component inputs plus Apple Composite AV
Cable and/or Apple Component AV Cable.
1. Go to Settings > Wi-Fi and connect to a known-good Wi-Fi network.
2. Connect the relevant video-out cable (composite or component) to device and to TV.
3. Launch the Videos app (iOS 5) or iPod app (iOS 4).
4. Select a test video and begin playback.
5. Verify that video plays on TV and that colors are correct.
Note: If movie plays in black & white, verify that correct video-out signal is selected (NTSC/PAL).
Test Main Camera
1. Remove any protective case that may interfere with camera lens or ash.
2. To take a photo: Launch the Camera app. Make sure slider in bottom right corner is set
to camera and not to video. Aim iPhone and tap the camera button at bottom center of
screen.
• Using a printed color copy of the Test Image (last page of this guide), ll the screen
with the Test Image before taking a photo.
• Verify that the primary colors are representative of the printed Test Image and no dark
spots are near the edges of the photo.