Specifications

iPhone 4S Take Apart — Battery 174
2012-02-21
16 Press battery
connector down onto
logic board.
17 Place battery cowling
underneath battery
connector as shown.
18 Install (2) new cross-
head screws at
battery connector
using iPhone Torque
Driver and JCIS #00
Bit:
• Screw #1, 923-0055
• Screw #2, 923-0056
Important: Do not
reuse old screws.
19 Reinstall back cover
following reassembly
instructions in that
chapter.
20 Important: Check
main camera
operation and LED
ash alignment with
the Main Camera
Test procedure. If test
fails, replace camera.