Specifications

iPhone 4 (CDMA model) Take Apart — Battery 144
2012-02-21
16 Press battery
connector down onto
logic board.
17 Install (1) new
cross-head screw
(452-2070) at battery
connector using
iPhone Torque Driver
and JCIS #00 Bit.
Important: Do not
reuse old screws.
18 Reinstall back cover
using 2 new dock
screws (452-2055)
included in kit.
19 Important: Check
main camera
operation and LED
ash alignment with
the Main Camera
Test procedure. If test
fails, replace camera.