Specifications

iPhone 4 (CDMA model) Take Apart — Main Camera 134
2012-02-21
4 Place camera cowling
into position as
shown, using
tweezers to hook
underneath logic
board.
Warning: Be careful
not to tear or
puncture the battery.
5 Install (5) new cross-
head screws using
iPhone Torque Driver
and JCIS #00 Bit.
Important: Do not
reuse old screws.
Note: Four screws
(452-2069) are the
same size. One screw
(452-1846, at left edge
near band) is larger.
6 Verify the main
camera is sitting ush
with the band and is
evenly aligned.
7 Reinstall back cover
using 2 new dock
screws (452-2055)
included in kit.
8 Important: Check
main camera
operation and LED
ash alignment with
the Main Camera
Test procedure. If test
fails, replace camera.