Specifications

iPhone 4 (GSM model) Take Apart — Vibe Motor 108
2012-02-21
Reassembly
1
Position vibe motor in
iPhone.
2 Install (2) new cross-
head screws in the
order shown using
iPhone Torque Driver
and JCIS #00 Bit.
Each screw bag in the
kit is marked with the
number of the
location where it
should be installed.
• Screw #1, 452-1845
(longer)
• Screw #2, 452-1765
(shorter)
Important: Do not
reuse old screws.
3 Reinstall back cover
following reassembly
instructions in that
chapter.
4 Important: Check
main camera
operation and LED
ash alignment with
the Main Camera
Test procedure. If test
fails, replace camera.