Repair Guide

iPhone 13 Pro
073-00324-A | 56© 2022 Apple Inc. All rights reserved.
2. Use a torque driver and the
Micro stix bit to remove
the four trilobe screws from
the camera cowling (1). Set
aside the screws.
Removal
Camera | Removal
1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.
3. Use a torque driver and
the JCIS bit to remove the
crosshead screw from the
camera cowling (2). Set
aside the screw.
4. Use ESD-safe tweezers to
tilt up the left side of the
camera cowling (1). Then
slide the cowling tabs out of
the slots on the right side of
the enclosure (2). Save the
cowling for reassembly.