Repair Guide

iPhone 13 Pro
073-00324-A | 41© 2022 Apple Inc. All rights reserved.
Display | Reassembly
5. The replacement display
adhesive has a top release
liner, a middle release
liner, and a flexible bottom
release liner. Grasp the tab
on the bottom release liner.
Then slowly pull the bottom
release liner (1) out from
under the adhesive (2) while
pressing the adhesive onto
the enclosure.
Don’t remove the top
release liner yet.
Important
Bottom release liner
Adhesive
Note: The replacement
display adhesive for your
model may look different
from the illustration, but the
steps are the same.