Repair Guide

iPhone 13 Pro Max
073-00325-A | 60© 2022 Apple Inc. All rights reserved.
Camera | Reassembly
7. Hold the camera cowling in
place with your finger. Then
use the black torque driver
and Micro stix bit to install
one new trilobe screw into
the middle of the cowling (1).
• Ensure that the screw cutouts in the camera cowling align with the screw holes and that the
tabs are inside the slots in the enclosure. A misaligned camera cowling may affect display
image quality.
• Ensure that the grounding spring on the camera cowling isn’t damaged. Avoid touching the
grounding spring as you reinstall the cowling.
Caution
6. The camera cowling has tabs that fit into slots on the right side of the enclosure. Hold the cowling with
ESD-safe tweezers and slide the cowling tabs into the slots. Then lower the cowling onto the cameras.
5. Lightly press the cameras into the enclosure.
8. Use the black torque
driver and Micro stix bit
to install three new trilobe
screws (2-4) into the
camera cowling.
9. Use the gray torque driver
and JCIS bit to install one
new crosshead screw into
the camera cowling (5).
• Display
Reinstall the following part to complete reassembly:
After you’ve completed all removal and reassembly steps, learn how to initiate the System
Configuration process at support.apple.com/self-service-repair.
Important