Repair Guide

iPhone 13 Pro Max
073-00325-A | 49© 2022 Apple Inc. All rights reserved.
Display | Reassembly
30. Use the gray torque driver
and Torx security bit to
install two new security
screws, one on each side of
the Lightning connector. As
you install the screws, press
lightly on the display near
the Lightning connector.
If the screws aren’t flush,
remove and set aside the
screws. Repeat step 30 to
install another new set of
screws. If the new screws
still aren’t flush, repeat all
removal and reassembly
steps.
Caution
• System Configuration is required if you’ve installed a replacement display, battery, or camera.
Disregard notifications about iPhone features on the Lock Screen until you complete System
Configuration.
• After you’ve completed all removal and reassembly steps, learn how to initiate the System
Configuration process at support.apple.com/self-service-repair.
Important