Repair Guide

iPhone 13 Pro Max
073-00325-A | 44© 2022 Apple Inc. All rights reserved.
16. Use ESD-safe tweezers to
position the lower cowling
over the ends of the display
and battery flex cables.
18. Use ESD-safe tweezers to
slide the tab of the upper
cowling behind the ambient
light sensor flex cable. Then
lower the cowling over the
end of the flex cable.
17. Use the black torque driver
and Micro stix bit to install
three new trilobe screws
into the lower cowling.
19. Use the green torque driver
and JCIS bit to install two new
crosshead screws into the
upper cowling (1).
Display | Reassembly
20. Use the black torque driver
and Micro stix bit to install
two new trilobe screws into
the upper cowling (2).