Repair Guide

iPhone 13 Pro Max
073-00325-A | 43© 2022 Apple Inc. All rights reserved.
14. Press the ends of the
display flex cable (1) and
ambient light sensor flex
cable (2) to the connectors.
Press evenly along the
length of each connector.
Display | Reassembly
11. Remove the left section on
the top release liner first (1).
Then remove the three
sections running along the
right (2), top (3), and
bottom (4).
12. Insert the suction cups into the repair tray.
13. Align the left edge of the display with the left edge of the enclosure. Gently press along the edges of
the display to secure it to the suction cups.
Don’t remove the middle
release liner yet.
Important
15. Press the end of the
battery flex cable to the
connector (3). Press
evenly along the length of
the connector.
Top release liner