Repair Guide

iPhone 13 Pro Max
073-00325-A | 35© 2022 Apple Inc. All rights reserved.
22. Use a torque driver and the
JCIS bit to remove the two
crosshead screws from the
upper cowling (3). Hold the
cowling in place while you
remove the last screw. Set
aside the screws.
23. Use ESD-safe tweezers to remove the lower cowling. Save the cowling for reassembly.
Display | Removal
21. Use a torque driver and the
Micro stix bit to remove the
three trilobe screws from
the lower cowling (1) and
the two trilobe screws from
the upper cowling (2). Set
aside the screws.
24. Use ESD-safe tweezers to tilt up the upper cowling. Then slide the cowling out from under the
ambient light sensor flex cable. Save the cowling for reassembly.
Caution
Don’t tear the ambient light sensor flex cable while removing the cowling.