Repair Guide

iPhone 13 mini
073-00322-A | 64© 2022 Apple Inc. All rights reserved.
1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.
2. Use a torque driver and the
JCIS bit to remove the two
crosshead screws from the
Taptic Engine connector
cowling. Set aside the
screws.
4. Use a torque driver and
the JCIS bit to remove the
crosshead screw from the
Taptic Engine. Set aside the
screw.
3. Remove the Taptic Engine connector cowling and save it for reassembly.
Removal
Taptic Engine | Removal
Don’t damage the
grounding spring on the
cowling.
Caution