Repair Guide

iPhone 13 mini
073-00322-A | 46© 2022 Apple Inc. All rights reserved.
Display I Reassembly
21. Peel the first strip from
the middle release liner (1)
clockwise, starting near
the bottom right of the
enclosure. Peel the second
strip (2) counterclockwise,
starting near the bottom
right of the enclosure. Peel
the third strip (3) clockwise,
starting at the bottom left of
the enclosure.
22. Inspect the display adhesive to ensure that it’s in the correct position and not damaged or wrinkled. If
the adhesive is damaged, remove it and apply replacement adhesive.
23. Repeat step 3 to ensure that the TrueDepth camera is in the correct position. Then continue to
step 24.
24. Pull the tabs on the suction cups to release them from the display. Tilt down the display to rest on
the enclosure.
25. Remove the suction cups from the repair tray.
Inspect the enclosure for loose or extra screws and small parts, which can damage the battery and
cause safety issues.
Warning
Middle release liner