Repair Guide

iPhone 13 mini
073-00322-A | 43© 2022 Apple Inc. All rights reserved.
Display I Reassembly
11. Remove the left section of the
top release liner first (1). Then
remove the three sections
running along the top (2),
right (3), and bottom (4).
Don’t remove the middle
release liner strips yet.
Important
14. Press the ends of the
display flex cable (1) and
ambient light sensor flex
cable (2) to the connectors.
Press evenly along the
length of each connector.
12. Insert the suction cups into the repair tray.
13. Align the left edge of the
display with the left edge
of the enclosure as shown.
Gently press along the edges
of the display to secure it to
the suction cups.
15. Press the end of the battery
flex cable to the connector (3).
Press evenly along the length
of the connector.
Top release liner