Repair Guide

iPhone 13 mini
073-00322-A | 39© 2022 Apple Inc. All rights reserved.
Display I Reassembly
5. The replacement display
adhesive has a top release
liner, a middle release liner,
and a bottom release liner.
Grasp the tab from the
bottom release liner. Then
slowly pull the bottom
release liner (1) out from
under the adhesive (2) while
pressing the adhesive onto
the enclosure.
Don’t remove the top
release liner yet.
Note: The replacement
display adhesive for your
model may look different
from the illustration, but
the steps are the same.
Important
Bottom release liner
Adhesive