Repair Guide

iPhone 13 mini
073-00322-A | 38© 2022 Apple Inc. All rights reserved.
Display I Reassembly
Reassembly
1. Inspect the internal display clips for damage before reassembly. Ensure that the internal display clips
are at a 90-degree angle and aren’t bent or damaged.
2. Place the enclosure in the repair tray with the Lightning connector facing the cutout.
3. Inspect the TrueDepth
camera. Ensure that the
top edge of the TrueDepth
camera is under the lip of
the enclosure.
4. Align the replacement display adhesive over the enclosure with the grounding foam on top and the
bottom tab on the left.
Ensure that you’ve removed all adhesive residue from the display and the enclosure before you
apply the replacement display adhesive.
Inspect the enclosure for loose or extra screws and small parts, which can damage the battery and
cause safety issues.
Caution
Warning
• If the internal display clips are damaged, you may need to replace the display.
• If you’re installing a replacement display, peel the protective liner from the top and
underside of it.
Important
Caution
If the TrueDepth camera is
positioned incorrectly, use
the black stick to move it
into the correct position.