Repair Guide

iPhone 13 mini
073-00322-A | 35© 2022 Apple Inc. All rights reserved.
28. Hold the display by the edges. Pull the tabs on the suction cups to release them from the display.
Then set the display facedown on a clean, flat surface.
29. Remove the suction cups from the repair tray.
Display I Removal
25. Use ESD-safe tweezers to
tilt up the upper cowling (1).
Then slide the cowling out
from under the ambient light
sensor flex cable (2). Save
the cowling for reassembly.
26. Use the black stick to lift
the end of the battery flex
cable (1) off the connector.
27. Use the black stick to lift
the ends of the display flex
cable (2) and ambient light
sensor flex cable (3) off the
connectors.
Caution
Don’t damage the
ambient light sensor flex
cable while removing the
cowling.
Caution
You must disconnect the
battery flex cable first to
ensure that the iPhone
remains turned off.