Repair Guide

iPhone 12 Pro Max
073-00293-A | 66© 2022 Apple Inc. All rights reserved.
1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.
2. Use a torque driver and
the JCIS bit to remove the
crosshead screw from the
Taptic Engine cowling. Set
aside the screw.
3. Use ESD-safe tweezers to remove the Taptic Engine cowling. Save the cowling for reassembly.
Removal
Taptic Engine | Removal
4. Use a torque driver and the
super screw bit to remove
the two super screws from
the Taptic Engine. Set aside
the screws.