Repair Guide

iPhone 12 Pro Max
073-00293-A | 53© 2022 Apple Inc. All rights reserved.
1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.
2. Use a torque driver and
the Micro stix bit to remove
the five trilobe screws from
the camera cowling in the
order shown. Hold the
camera cowling in place
as you remove the center
screw (5). Set aside the
screws.
3. Use ESD-safe tweezers to
tilt up the camera cowling
from the left side. Then
slide the cowling tab out of
the slot on the right of the
enclosure. Save the cowling
for reassembly.
Removal
Camera | Removal
Avoid touching the
grounding springs.
Caution