Repair Guide

iPhone 12 Pro Max
073-00293-A | 46© 2022 Apple Inc. All rights reserved.
Display | Reassembly
17. The upper cowling has a tab
near the third screw hole
that fits into a slot near the
camera cowling (3). Use
ESD-safe tweezers to fit the
tab into the slot. Then lower
the cowling over the end of
the receiver flex cable.
18. Use the black torque driver
and Micro stix bit to install
four new trilobe screws (1–4)
into the upper cowling in the
order shown.
19. Peel the first strip of the
middle release liner (1)
clockwise, starting at the
top right of the enclosure.
Peel the second strip of
the middle release liner (2)
counterclockwise, starting at
the top right of the enclosure.
Then peel the third strip (3)
counterclockwise, starting at
the top left of the enclosure.
Middle release liner