Repair Guide

iPhone 12 Pro Max
073-00293-A | 45© 2022 Apple Inc. All rights reserved.
13. Press the ends of the
display flex cable (1) and
receiver flex cable (2) to
the connectors. Press
evenly along the length of
each connector.
14. Press the end of the
battery flex cable to the
connector (3). Press
evenly along the length of
the connector.
Display | Reassembly
12. Align the left edge of the
display with the left edge
of the enclosure as shown.
Gently press along the
edges of the display to
secure it to the suction cups.
15. Use ESD-safe tweezers to
position the lower cowling
over the ends of the display
and battery flex cables.
16. Use the black torque driver
and Micro stix bit to install
four new trilobe screws into
the lower cowling.