Repair Guide

iPhone 12 Pro Max
073-00293-A | 35© 2022 Apple Inc. All rights reserved.
22. Use ESD-safe tweezers to remove the lower cowling. Save the cowling for reassembly.
23. Use a torque driver and the
Micro stix bit to remove the
three trilobe screws from
the upper cowling. Set aside
the screws.
24. Hold the upper cowling
in place and use a torque
driver and the Micro stix bit
to remove the last trilobe
screw (1). Set aside the
screw.
Display | Removal
Note: The upper cowling
has a tab that fits into a slot
near the camera cowling (2).
25. Use ESD-safe tweezers to
tilt up the outer edge of the
upper cowling. Then slide
the upper cowling slightly
toward the camera cowling
to release the tab. Save the
cowling for reassembly.