Repair Manual

iPhone 12 mini
073-00290-A | 81© 2022 Apple Inc. All rights reserved.
6. Use the green torque driver
and JCIS bit to install two
new crosshead screws
into the Taptic Engine
connector cowling.
Taptic Engine | Reassembly
Avoid touching the
grounding spring on the
Taptic Engine connector
cowling.
Caution
Reinstall the following part to complete reassembly:
• Display
Micro stix® is a registered trademark of OSG CORPORATION. Torx® is a registered trademark of Acument Intellectual Properties, LLC.
5. Position the Taptic Engine
connector cowling over the
end of the flex cable.